Our Blog

SMS Marketing Automation: A Guide for Australian Businesses

10 min read

SMS marketing automation sends the right text to the right person the moment they act, such as submitting a form, booking, buying or abandoning a cart, without anyone pressing send. For an Australian business it works best when it is wired into your website and CRM (the system that stores your contacts), and when consent and unsubscribe handling are built in from day one. That is how we build it at Volt Agency: SMS, email and CRM follow-up running together, managed by our team for Wix sites.

TL;DR

  • SMS automation runs on three parts: a trigger (what the customer did), a rule (who qualifies and when) and a message (what is sent).
  • The highest-value workflows are speed-to-lead replies, booking reminders, order updates, abandoned-cart nudges and win-back messages.
  • Under the Spam Act 2003, every commercial text needs consent you can prove, clear sender identification and a working unsubscribe option.
  • Our automation plans start at $59 per month, with a one-off setup fee of $660, and run alongside your Wix CRM and email.
  • Treat the build as a system: consent capture on the site, workflow logic, compliance, then measurement.

Table of Contents

What SMS marketing automation actually is

A one-off SMS campaign is a broadcast: you write a message and send it to a list at a time you choose. Automation is different. You set a rule once, and the system applies it to every contact who meets it, for as long as it stays switched on.

Every automated text has the same anatomy:

  1. Trigger. An event in your website, CRM or shop: a new enquiry, a booking, a purchase, a date, a tag added to a contact.
  2. Rule. The conditions and timing: send straight away, wait two hours, only if the contact has not replied, only to people who opted in.
  3. Message. A short pre-written text, usually with the contact’s name or order details merged in.

In practice you will meet three workflow types. Triggered messages respond to something a person did. Scheduled sequences are drip series, such as a welcome text followed by a second text three days later. Broadcasts are one-to-many sends that you still schedule yourself. Most of the commercial value sits in the first two, because they reach people when the context is fresh.

Why it matters more for lead-driven and online businesses

If your site collects enquiries or sells products, there is a gap between the moment someone shows interest and the moment a human gets round to answering. Email fills part of that gap, but a text lands where people look first. Automation closes the gap consistently: the enquiry gets an immediate acknowledgement, the quote request gets a follow-up, and the customer who left a basket gets a reminder.

The point is not volume. It is consistency. A well-built workflow never forgets, never sends at 2am and never texts someone who has opted out. That last part is the one most businesses get wrong, which is why the legal section below comes before the build steps.

Five workflows worth building first

Start with workflows tied to a clear customer action. They are the easiest to justify and the least likely to feel like spam.

1. Instant reply to a new enquiry

Trigger: a contact form or booking request on your website. Message: a short acknowledgement with your business name, what happens next and who will be in touch. The same trigger can create the contact in your CRM and notify your team, so the text and the internal task happen together. We cover that setup in our guide to using Wix’s CRM and automations for leads.

2. Appointment and booking reminders

Trigger: a scheduled booking. Message: a reminder the day before, with the time, address and a way to reschedule. Reminders are transactional in tone and suit trades, clinics, salons, consultants and any service that loses money on no-shows.

3. Order and shipping updates

Trigger: order placed, paid or dispatched. These messages answer the question customers would otherwise email you about. If you run a Wix store, our piece on Wix ecommerce notifications shows how store events can drive messages.

4. Abandoned-cart reminders

Trigger: a checkout started but not completed. Message: a short nudge with the customer’s first name and a link back to their cart, sent within a sensible window after abandonment. Keep it to one or two texts, not a chase.

5. Win-back and follow-up sequences

Trigger: no purchase or no reply after a set number of days. A short sequence of two or three messages, spaced out, with a clear way to opt out. Segmenting matters here: a text to a lapsed customer should differ from one to a first-time enquirer, and merge fields such as first name or last purchase make the message read as written for one person.

The rules: Spam Act 2003 and your automations

In Australia, a marketing text is a commercial electronic message, and the Spam Act 2003 applies to it. The regulator is the Australian Communications and Media Authority (ACMA). Its guidance sets three requirements for every commercial SMS: consent, sender identification and a working unsubscribe option. You must also be able to prove consent if ACMA asks.

Automation does not change any of this. ACMA’s list of common mistakes states that automated SMS welcome journeys with commercial content must comply with the spam rules just like a manual send.

Consent

Consent can be express, such as a form, tick-box, phone call or face-to-face agreement, or inferred from an existing relationship. ACMA recommends express consent with clear, accessible terms that explain what the marketing is for, who will use the details, how long they will be used and how consent can be withdrawn.

For a Wix site, that means a form field that is not pre-ticked, wording that names SMS specifically, and a record of when and where each contact opted in. The consent record should live in the same CRM that triggers the workflow, so a contact without recorded consent never enters a marketing sequence.

Identification and unsubscribe

Every message must say who sent it and give a working way to opt out. ACMA’s unsubscribe fact sheet says the opt-out must have clear instructions, be actioned within 5 working days, carry no fee, cost no more than a standard text charge, work for at least 30 days after the send, and not require a login or extra personal information. The Spam Act itself sets the five-business-day period for withdrawal of consent to take effect.

One trap is specific to automation. If you send from an alphanumeric sender ID (your business name shown instead of a number), recipients generally cannot reply. ACMA notes that asking people to reply to such a sender ID to unsubscribe breaks the law. Use an opt-out link, or send from a number that can receive replies. A number that receives replies is also what you need for keyword triggers and reply-to-confirm flows.

Why it is worth getting right

ACMA’s enforcement is public. In June 2025 it penalised TAB $4,003,270 after finding thousands of messages sent without an unsubscribe option or adequate sender information, and a smaller number sent without consent. Its infringement notices register lists further penalties against well-known Australian brands, with the reasons differing case by case.

Smaller businesses are not exempt, and many are unsure of the rules. ACMA’s 2024 research on small and medium businesses found that 51% of SME e-marketers were unaware or unsure of the unsubscribe rules, and that only 65% of SMS unsubscribe requests were actioned automatically, compared with 81% for email. Manual opt-out handling is where deadlines slip. An automation that processes opt-outs the moment they arrive removes that risk.

This is general information, not legal advice. If your situation is complex, for example you are buying a contact list or marketing across several countries, speak to a lawyer who knows Australian spam and privacy law.

How to set up SMS marketing automation, step by step

The sequence below is the one we follow when we build automation for a client. Each step shows what it takes and where it usually goes wrong.

Step 1: Map the customer actions that matter

List the moments when a customer would benefit from a text: enquiry, booking, purchase, abandonment, silence. Pick two or three to start. The common failure is trying to automate everything at once, which produces overlapping messages to the same person. Our team maps these moments against your actual site, forms and store before anything is built.

Step 2: Fix consent capture on the site

Before a single workflow runs, every form that collects a mobile number needs clear SMS consent wording and a stored record. The common failure is a phone field on a contact form with no consent statement, which leaves you with numbers you cannot lawfully market to. This is website work as much as marketing work, which is why it helps that the same team builds your Wix site and your automation.

Step 3: Connect your CRM, site and messaging

Triggers only work when your systems share data. Form submissions, bookings and orders need to create or update a contact in the CRM, and the CRM needs to hold consent status, tags and the details you merge into messages. The failure here is data living in three places that do not talk to each other. Where a project needs more than standard connections, we can extend Wix with custom development and app integration and management. Our guide to getting more leads with Wix CRM and automation covers the CRM side in more detail.

Step 4: Write short, specific messages

A good automated text names your business, says why the person is receiving it, delivers one piece of information or one action, and gives a way to opt out where the message is promotional. Use merge fields sparingly: a first name and an order or appointment detail are enough. The failure is writing like a brochure. If a text would not make sense read cold on a lock screen, rewrite it.

Step 5: Set timing and frequency

Send within sensible hours, wait long enough after an abandoned cart that the customer has had time to return on their own, and cap how many messages one contact can receive in a week. Build the cap into the workflow itself rather than relying on someone to remember. Frequency that is too high shows up as a rising opt-out rate, which is your signal to pull back.

Step 6: Handle replies

An automated text invites a reply, and a reply that nobody reads undoes the benefit of the speed. Decide who sees replies, how fast they are answered, and which keywords (for example a reply to confirm a booking) trigger an automatic response. This is another reason to send from a number that can receive replies rather than a name-only sender ID.

Step 7: Test, launch and watch the first week

Run every workflow as a test contact before launch: check the trigger fires, the merge fields fill in, the opt-out works and the contact is suppressed afterwards. Then watch the first week of live sends closely. Most problems, such as double sends or a missed condition, appear quickly.

Measuring whether it works

Pick a small set of measures before you launch, and compare them with your pre-automation baseline:

  • Response time to new enquiries. How long between the form submission and the first contact?
  • Enquiry-to-booking or enquiry-to-sale rate. The number that pays for the system.
  • Opt-out rate per workflow. A spike in one workflow points to wording or frequency problems.
  • Recovered revenue from cart reminders, measured against carts that received no text.
  • Delivery failures. Numbers that bounce need cleaning out of the list.

When you test message variations, change one thing at a time, such as the wording of the call to action or the send time, and split the audience evenly so the comparison is fair. Give each test enough time and enough sends before declaring a winner.

What it costs with Volt Agency

There are two ways to run SMS automation: build and maintain it in-house, or have a team build and manage it. We offer managed monthly plans for CRM, email and SMS automation, with a one-off setup fee. These are our published prices for the plans on our automation page:

PlanPrice
Basic$59 per month
Starter Automation$99 per month
Growth Automation$199 per month
Scale Automation$299 per month
Automation setup fee$660 one-off

If your website also needs work, our Wix web design packages are $770 for a single-page Basic Website, $1,490 for a five-page Growth site and $1,900 for the ten-page High Performance site. Wix support and hosting is $99 per month. Custom Velo development and Wix eCommerce projects are quoted individually.

Putting it together: one team for site, CRM and texts

SMS automation fails most often at the joins: a form that does not record consent, a CRM that does not receive the order, a workflow nobody owns. When one team builds the Wix site, the CRM connection and the automation, those joins are designed rather than patched. Our plans are built and managed by the team, so the workflows are maintained after launch instead of left to drift.

If you want SMS, email and CRM follow-up working together on your Wix site, see our Volt Automation plans. If the site itself needs rebuilding first, our Wix web design packages are the place to start. For online stores, our Wix eCommerce solutions cover the store side of the same system.

Smart chat and on-site messaging can sit alongside SMS as well: see how to set up Wix Smart Chat so that enquiries can start on the site and continue by text.

FAQ

Is SMS marketing legal in Australia?

Yes, when you follow the Spam Act 2003. You need consent from each recipient, must identify your business in the message, and must include a working unsubscribe option. You should also be able to prove consent if ACMA asks for it. ACMA’s guidance sets out each requirement.

How do I automate SMS messages?

Choose a trigger such as a form submission, booking or abandoned cart, set a rule for who qualifies and when, and write the message. The workflow then runs on its own for every contact who meets the rule. Before you switch it on, make sure consent is captured and stored and that the opt-out works.

How long do I have to process an unsubscribe request?

The opt-out must be actioned within 5 working days, and it must be free, work for at least 30 days after the message is sent, and not require a login. The safest approach is to have your automation suppress the contact immediately, as set out in ACMA’s unsubscribe rules.

Can I use my business name as the sender?

Yes, but recipients generally cannot reply to a name-only sender ID. That means you cannot ask them to reply to opt out, and keyword or reply-to-confirm automations will not work. Use an opt-out link, or send from a number that can receive replies.

What does SMS automation cost with Volt Agency?

Our managed automation plans run from $59 to $299 per month, with a one-off setup fee of $660. The plan you need depends on how many workflows and channels you want us to manage. The details are on our automation page.

Sources

Recommended

More from the Blog

All posts
A team having a meeting about website cost.

Web Design

How Much Does a Website Cost in Australia?

Website costs in Australia explained: typical ranges, fixed-price Wix packages from $770, yearly running costs, tax deductions and how to compare quotes.

5 min read

Let’s Talk

Supercharge Your OnlinePresence with Volt

Let’s start elevating your brand on Wix. Contact us today and learn more about how our team can help transform your online footprint into your most powerful asset.